ASSOCIATE DIPLOMA IN INFORMATION TECHNOLOGY

(0 review)
$5,580.00
ASSOCIATE DIPLOMA IN INFORMATION TECHNOLOGY
Gain a Practical Qualification in IT from home.
A solid foundation for a career in I.T., this course focuses on developing awareness of industry, knowledge of valuable skills and a capacity to adapt to change in order to remain abreast of what is a rapidly changing discipline. This course does not require any previous IT experience as it takes you right from the basics to a higher level.
The course encompasses a wide range of practical subjects including programming languages such as VB.net, ASP, SQL, Javascript, HTML as well as providing a wide range of elective modules including ecommerce, marketing subjects, editing and more.

Accreditation: I.A.R.C (International Accreditation & Recognition Counsel)

Change is fast and inevitable in the IT industry.
Most courses simply don’t keep up to date; but if you learn the fundamentals across a wide enough swathe of the industry, from people who are not only teachers, but also practicing programmers and technicians; you have the capacity to be part of the changes that are moving the IT industry forward.
Our courses may not be perfect but they are structured and delivered to prepare our graduates for the uncertain, yet exiting future. This is a substantial and broad based diploma. Graduates from our diplomas have been exceptionally successful for decades. They are not the same as what you find elsewhere; but they are focussed on what you need to develop an outstanding future in the industry.

COURSE STRUCTURE

To obtain this qualification you need to complete all assignments and pass exams in 14 modules. In addition you need to provide proof of attendance at 100 hours of industry meetings such as professional association committee meetings, seminars, conferences or trade shows.

Modules

Core Modules These modules provide foundation knowledge for the Associate Diploma In Information Technology.
Industry Project BIP000
Computer Operations VIT101
Flash CS BIT102
Html (Writing a Website) VIT102
Visual Basic.Net BIT101
ASP.NET BIT200
Computer Servicing I VIT203
Computer Servicing II VIT204
Photoshop CS – Beginner To Medium Level VIT202
SQL For The Web BIT201
Elective Modules In addition to the core modules, students study any 5 of the following 15 modules.
E Commerce BIT100
Editing I (Editing and Proofreading) BWR106
Marketing Foundations VBS109
Networking Foundations BIT103
Publishing I BWR107
Advertising and Promotions BBS202
Computer Servicing III VIT205
Digital Photography BPH202
Graphic Design BIT205
Information Security BIT203
Internet Marketing BIT204
Javascript BIT202
Publishing II BWR202
Editing II BWR302
Editing Practice BWR305

Note that each module in the Associate Diploma In Information Technology is a short course in its own right, and may be studied separately.


Computer Operations

  1. Hardware Components
  2. Peripherals
  3. Operating Systems
  4. Files & Folders
  5. Office Applications – Saving Files & Documents, Switching Windows
  6. Windows Accessories Programs
  7. Disk Management
  8. Installation Of Software
  9. Trouble Shooting
  10. Microsoft Word
  11. Microsoft Excel
  12. Microsoft Access
  13. Microsoft PowerPoint

Writing a Web Site (HTML)

  1. Introduction to the Internet and HTML
  2. The most important HTML Tags
  3. Simplification through HTML Construction Software
  4. Creating Links
  5. Loading a Site onto the Internet
  6. Adding Graphics
  7. Designing a Web Site that Works
  8. Advanced Features

Visual Basic .Net Programming

  1. Introduction To Visual Basic
  2. Code Theory (Part 1)
  3. Code Theory (Part 2)
  4. Objects (Part 1)
  5. Objects (Part 2)
  6. Application Design

ASP.Net

  1. Introduction
  2. VB.NET Essentials
  3. Web Forms
  4. Web Server Controls
  5. Form Validation
  6. Classes and Namespaces
  7. ASP.NET Applications
  8. Interacting with Databases
  9. Error Handling
  10. Email from Your Applications
  11. Project: Creating an Online Store

E Commerce

  1. Introduction – what is e-commerce (more than the internet)
  2. Success and failure – what makes the difference
  3. Promotional strategies – are different on the internet
  4. Optimizing web site potential
  5. Increasing web site exposure
  6. Automating supply of goods, services and cash flow
  7. Managing constant change
  8. Dealing with e-commerce problems

 

SQL

  1. Introduction to Databases
  2. Fundamentals of SQL
  3. Building a database with SQL
  4. Storing & Retrieving Data
  5. Advanced SQL database access methods
  6. Database Security
  7. Using SQL in applications
  8. Cursors
  9. Stored procedures
  10. Error Handling
  11. Dynamic SQL
  12. Advice & Tips

Javascript

  1. Introduction
  2. JavascriptEssentials I
  3. Javascript Essentials 2
  4. Functions
  5. Events and Event handling
  6. Advanced Javascript
  7. Dynamic HTML
  8. Writing Simple Web Applications
  9. Pop Ups and Navigation Menus.
  10. Javascript Applications

Photoshop

  1. Learning the menus
  2. Working with digital image files
  3. Understanding the Tool Palette
  4. Using Layers, Actions and History
  5. Digital painting, shapes and colours
  6. Selecting, Resizing, Transforming and Masking
  7. Adjustments and modifications
  8. Adding Filters and Styles
  9. Preparing files for print and web

 

Computer Servicing I

  1. The Computer Workshop.
  2. Computer and Workshop safety.
  3. Hardware Components.
  4. Different Systems & Basic Disassembly.
  5. System Assembly.
  6. Peripherals.
  7. Installation of software.
  8. Computer Maintenance.
  9. Troubleshooting.

Computer Servicing II

  1. Introduction to hardware components
  2. Basic Diagnostic Equipment
  3. Electric Circuits and Components
  4. Problem Solving and Fault Analysis
  5. Diagnostic Testing [A] (Self Tests and Diagnostic Cards)
  6. Diagnostic Testing [B] (System Board and Memory Tests)
  7. Software maintenance and troubleshooting
  8. Disk drives and CD-ROM
  9. Video and Audio Systems
  10. Developing a Maintenance Program

Computer Servicing III

  1. Removable storage
  2. Electronics
  3. Audio systems
  4. Video systems
  5. Laptops and other portable devices
  6. Diagnosis and regular maintenance
  7. Networking – an introduction
  8. The Internet
  9. Printers

 

Networking Foundations

  1. Networking Terms, Concepts and Standards
  2. Network Topology, Architecture and Transmission Media
  3. Network Components and Hardware
  4. Network Design and Planning
  5. Network Upgrading and Project Management
  6. Network Protection and Maintenance
  7. Understanding Network Connecting Options
  8. Installation and Configuration of Network
  9. Basic TCP/IP Services and Applications
  10. Troubleshooting Tools for TCP/IP Networks

Protecting Your Data
Data integrity is a term used extensively nowadays in the field of information security, so it is important to understand what the term integrity really means in this context.
Data integrity refers to data being unchanged when it is being created or stored on a disk or while being transmitted. To preserve data integrity, changes to data created, stored or transmitted should only occur when these changes are authorised. Data integrity is violated when stored data undergoes unauthorised changes whether these changes are caused by accident (such as bad disk sectors, hard disk crashes, transmission errors, noise in the transmission, etc.), by human error (from users, administrators, customers, etc.), or malicious intent.
There are many computational techniques used for verifying data integrity, the most common ones used are checksums, comparisons, message authentication, message digests and other mathematical algorithms. Cyclic Redundancy Check (also known as CRC) is one of the most important checksum technique and is used to check for errors on computers’ hard drives.
In order to preserve data integrity in information systems, it is important for any individual or business to understand and apply the protection, detection and correction models explained below.
Protection
Any business should be able to establish a set of standards and procedures in order to protect their information systems, and minimise the threats to data integrity. These threats include but are not limited to: human errors, hardware and equipment failure, computer viruses and worms, cybercrime and natural disasters (such as cyclones, earthquakes, tornadoes, floods, etc.)Detection
It is also important to be able to detect any risks to data integrity before they start causing havoc and adversely affect the business.
Correction
Most businesses understand that data loss is never fully preventable, and regardless of how much they try to avoid it, data loss might still happen at some stage. This is why every business should have business continuity plans in place, and they should be able to implement them as soon as data loss occurs, in order to minimise business downtime. As its name implies, a business continuity plan aims at recovering crucial data and allowing a business to resume its normal operations as quickly as possible, by minimising business downtime and recovering crucial data.
To apply the protection, detection and correction models, individuals and organisations can follow a few primary ways to fully realise data integrity such as redundancy, frequent backups, offsite storage, disaster recovery planning, installing antivirus software, installing hardware and/or software based firewalls, using UPS (Uninterrupted Power Supply) devices, etc.
Full backup
A full backup is done when a copy of all the data is stored on the required media device (i.e. tape or disk). There are advantages and disadvantages for this type of backup. The main advantage is that a full backup allows you to store a complete copy of all the data on the system, although this would prove to be time consuming, resource consuming, and requires a lot of disk space for storing the backup copy.
When a person or a business performs full backup copies on their data every couple of days, weeks or months, some part of this data might be unchanged whereas other parts of the data might have changed. Therefore, performing regular backups on data that has not changed is considered as senseless work because the same data will be present on multiple backups. For this reason, a full backup should be used only when a complete disk image backup is required. In other cases, systems administrators should consider other types of backups such as incremental, differential or mirror, or a combination of a few backup options. These will be explained in the sections below.
Incremental backup
An incremental backup is a backup type that saves a copy of the files that have been created or modified since the last backup was run. An incremental backup is generally scheduled to run at regular intervals of time, after a full backup is taken of the data. As soon as some files get created or modified, the incremental backup will process those files and take a copy of them. Incremental backups rely on an index file in order to find out which files have been created or modified on the drive or drives being backed up.
Differential backup
A differential backup is somehow similar to an incremental backup but the main difference is that it does not update the index file when each task is executed which means that every task execution will process any modifications to the data since the last full backup.
The main advantage of a differential backup is its speed of data restoration, but on the downside this backup requires more disk space because every differential backup will be of the same size or larger than the previous one.
Mirror backup
A mirror backup is very similar to a full back up, but the main difference is that the backup files in a mirror backup cannot get compressed and cannot be password protected. The main purpose of a mirror backup is to create an exact copy of the source data so if the source data is lost, the mirrored backup data can be accessed using tools such as Windows Explorer.
Onsite backup
When data is backed up and saved locally using devices such as magnetic tapes, DVD drives, CD drives or other disk drives, the backup method is referred to as “onsite backup”. In order for a backup to be considered an onsite backup, the storage devices will need to be located in the same location as the place where the backup is being taken. With larger organisations, data is backed up using network attached storage (or NAS) drives. NAS drives are hardware devices that have special networking capabilities. Only medium to large businesses were able to afford NAS storage drives in the past, but these devices have since started to drastically drop in price and have since been used by home computer users and businesses alike.Offsite backup
Unlike onsite backup, “offsite backup” refers to a data backup method whereby the data is backed up and stored in a remote location in order to provide an added layer of security for the data, in the event of a disaster.

WHAT WILL THIS COURSE DO FOR YOU?

This course is different to many others. It is an “experiential based” learning program; designed to get you involved with the I.T. industry as you study. The industry is changing faster than ever; and will continue to change; and for ongoing success you need to become “connected” and remain “connected”, so that you see and adapt to recent changes, and ongoing changes as your career moves forward.

Let us help you toward a successful career in information technology!

Course Features

  • Lectures 0
  • Quizzes 0
  • Duration 50 hours
  • Skill level All levels
  • Language English
  • Students 0
  • Certificate No
  • Assessments Self
Curriculum is empty.

Reviews

Average Rating

0
0 rating

Detailed Rating

5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 star
0
$5,580.00

Leave A Reply

Your email address will not be published. Required fields are marked *